LP1302 - Battery pack
Power supply for RF20 radio system transceivers. The battery pack consists of serial-parallel set of four LiIon cells with protective diagnostic circuits, and a capacity display.
LP20 - Battery pack
Power supply for RF20 radio system transceivers. The battery pack consists of serial-parallel set of six LiIon cells with a protective diagnostic circuit. The diagnostic circuit is equipped with a battery charging status display
PP20 - Battery holder
AA disposable batteries holder for the RF20 radio system that may be used in lieu of the LP1302 or LP20
NM1302 - Mobile charger
NM1302 charger is designed to charge BP1301 (NiCd), LP1302 (LiIon) and LP20 (LiIon) battery packs in vehicles providing 12 V
MA1302 - Vehicle support
MA1302 vehicle support supplies #RF20# transceivers with power and charges battery packs for this transceiver in vehicles with 12 V
NU1302 - Universal charger
The charger is designed to charge and discharge up to eight BP1301 (NiCd), LP1302 (LiIon) and LP20 (LiIon) battery packs.
PC20 - Small mains charger
PC20 small mains charger charges a single LP1302, LP20 (LiIon) battery pack.
SL20 - Solar charger
The SL20 solar charger is designed to charge LiIon battery packs with type designations LP1302 and LP20 for RF20
AS1301 - Short tape antenna 0.5 m
Short-distance communication between RF20 or RF1301 transceivers. This antenna can also be used with the RF13 transceiver
AL1301 - Long tape antenna 1.1 m
This is a basic type antenna for RF20 or RF1301 transceivers. This antenna can also be used with the RF13.
AL13 - Long tape antenna 1.5 m
This is a basic type antenna for RF13 transceiver (VHF). It can be easily used instead of 1.5 m
AL13.1 - Whip antenna 2 m
The antenna may replace AL13 antenna in the basic configuration of RF13 VHF transceiver set.
0.82 m short tape antenna
A broadband antenna designed for portable and handheld transceivers equipped with a standard TNC connector. It is used for communication
1.1 m long tape antenna
A broadband antenna designed for portable and handheld transceivers equipped with a standard TNC connector. It is used for communication
2.6 m VHF vehicle antenna
The antenna is designed for fixed installation on all types of wheeled and tracked vehicles. It has omnidirectional radiation pattern
Vehicle antenna VHF/UHF 2.7 m
The antenna is designed for fixed installation on all types of wheeled and tracked vehicles. It has omnidirectional radiation pattern.
Vehicle antenna VHF/UHF 1.3 m
The antenna is designed for fixed installation on all types of wheeled and tracked vehicles. It has omnidirectional radiation pattern.
1.88 m VHF vehicle antenna
It is intended for fixed mounting on the metal bodywork of the vehicle. A characteristic feature of the antenna is.
Vehicle antenna 2.6 m with GPS antenna
The antenna is designed for fixed installation on all types of wheeled and tracked vehicles. It has omnidirectional radiation pattern
RF13.8 - Hang-up antenna
This antenna is used for operation of the RF13 transceiver from trenches, forests or from buildings. The antena consits of
PD13 - Long-wire antenna
The directional long-wire antenna is used for range enlargment in a given direction. The antenna can be installed as half.
Discon antenna
This stationary antenna is fixed to a mast and is used for communication with all RF13 transceiver sets. This antenna
RF13.2 - Handset with control
The handset can be connected to any of the two audio connectors on the RF13 transceiver or to any transceiver
RF13.3 - Handset
When connected to the audio connectors of the transceiver, the handset makes it possible to make radio phonic communication and...
RF13.51R - Headset
The headset is designed for the situations when the RF13 or RF20, RF1301 operator is in need of free hands
RF13.51L - Headset
The headset is designed for the situations when the RF13 or RF20, RF1301 operator is in need of free hands
RF13.52R - Headset (VOX)
The headset is designed for the situations when the RF13 or RF20, RF1301 operator is in need of free hands..
RF13.52L - Headset (VOX)
The headset is designed for the situations when the RF13 or RF20, RF1301 operator is in need of free hands
RM1301 - Handheld microphone/speaker
The handheld microphone/speaker make it possible to operate the basic transceiver set and the mobile set without the necessity
RM20 - Handset with control
The handset with control is intended to control RF20 transceiver. Besides the basic functions of radio channel monitoring, transceiver keying and voice modulation, it features channel selection and step volume change.
RM23 - Handset with control
The handset with control is intended to control RF23 transceiver. Besides the basic functions of radio channel monitoring, transceiver keying and voice modulation, it features channel selection and step volume change
RF headsets
The RF product line headsets are designed for RF20 and RF13 radio system transceivers.
Handset
Standard type handset for widespread use in tactical communications devices equipped with M55116 type connector. It is designed to control.
Headset
Light-weight headband headset consists of a central housing unit supporting a microphone and earphone, are mounted on flexible boom arms
MM40WR - Mission module
Expansion module easily attachable to the RF40 transceiver or to the VA40 vehicle amplifier (forming one mechanical unit) contains a separate implemented transceiver using WaveRelay technology. Offered in several frequency band variants, primarily in the L-band and S-band. In addition to the necessary transceiver/amplifier connectors it has a standard TNC antenna connector and U-229/U-type connector for acoustic accessories.
FG40 - Fillgun
Designed to upload operating data to the RF40 transceiver. The fillgun is designed as a small compact unit equipped with a transceiver connector, a PC connector, stored data erase button and a signaling LED.
LP40 - Battery
LP40 battery is offered in two versions. Optimal battery type choice for a given application depends on the required radio...
BA40 - Power Adaptor
The BA40 Power Adaptor allows RF40 transceiver to be power supplied from Bren-Tronics’s BT-70716BE (5.8 Ah) and BT-70716BG
SL40 - Solar charger
The SL40 solar charger is designed to charge LiIon battery packs with type designations LP40S and LP40L for RF40 transceivers
VC40 - Vehicle charger
Designed to charge up to two LP40 batteries in both versions. Waterproof and compact charger design ensures high mechanical strength.
SC40 - Stationary charger
Designed to charge up to 8 LP40 batteries in both versions. The charger is installed in a watertight plastic case
PC40 - Simple charger
Designed to charge one LP40 battery in both versions. The charger is designed as a network adapter with a cable.